Teradek RT Single-Axis Super-Speed Wireless Lens Control Kit Metric 15-0046-M

Description

Teradek RT Single-Axis Super-Speed Wireless Lens Control Kit (Metric)
Wirelessly control your lens focus, iris, or zoom with this Teradek RT Single-Axis Super-Speed Wireless Lens Control Kit. The kit includes a CTRL.1 wireless lens controller, Latitude MDR-M wireless receiver, MOTR.X super-speed brushless lens motor, LP-E6 battery and charger, 19/15mm rod clamp, one iris overlay mapping disk, five focus overlay mapping disks calibrated in meters, one extra white marking disk for the controller, and a controller neck strap, as well as motor, controller, USB, and D-Tap cables. A vinyl zipper bag is included for your accessories, and a hard-shell case with custom foam is also included to carry the entire kit.
Connect the 0.8 MOD lens gear motor to your lens, mount it on a 19 or 15mm rod system, and then connect the wireless receiver to the motor using the included cables. The MOTR.X super-speed motor features six times the service life of brushed motors, and has a higher torque and speed compared to previous models. The receiver can control up to two lens motors.
The CTRL.1 controller can then connect and finely control either the focus, iris, or zoom from up to 5000' away. It is powered by the included LP-E6 battery, and can also connect to the motor with the included controller cable for a wired setup. The overlay marking disks are automatically calibrated in feet with the included lens mapping firmware license, and an extra white disk is included for manual marking in addition to the one preinstalled on the CTRL.1. Read more below about the items included in this kit.
Teradek RT Latitude MDR-M Receiver (1-2 Axis)
The mini RT MDR-M Receiver (1-2 Axis) from Teradek is part of the Latitude lens control system operating via both RF (wireless) and WiFi. This receiver's 0.6-mile wireless range is handy for drone use and for when you're operating in harsh RF environments like stadiums. Expanding upon the camera run/stop function of the RT MK3.1, the MDR-M's WiFi connectivity provides camera control for RED DSMC2/DSMC cameras (with additional cameras to be added via a firmware update). This Latitude receiver is compatible with RT MK3.1 controllers and motors, driving up to two lens motors with functions such as focus, iris, and/or zoom (controller and motors available separately).
The MDR-M Receiver's integration with RED provides several options for DSMC2/DSMC lens and camera control. Use the RT MK3.1 wireless controller and RF wireless to control EF lenses via their internal motor; PL lenses can be controlled with the addition of RT Motors. Both the MK3.1 controller and the RT Smartknob can provide shutter, ISO, and button-feature control. RT Thumbwheels can provide focus and iris control, and the Foolcontrol app can be used with a WiFi connection.
In Transmitter Mode, two MRR-M units can be paired to extend control up to 0.9 miles away from your camera using WiFi, RF wireless, and the RT Foolcontrol iOS/Android app. Use the Foolcontrol app to a create a versatile interface between the Latitude system and your camera, lens, and smartphone.
The RT MDR-M Receiver is made from aircraft-grade aluminum, and is designed with an integrated antenna, lessening the chance of antenna damage. Power this ultra-compact, lightweight receiver via its 7-17V 2-pin LEMO port.
Note:
This receiver has one motor port, a Dual Motor cable (not included) is required to control two motors.
Features
Drives up to two motors for focus, iris, or zoom functions
Compatible with RT MK3.1 controllers and motors
RF (wireless) and WiFi control
Run/stop support for most cine-style HD cameras
Camera control for RED DSMC2/DSMC cameras
Supports RT Smartknob and Thumbwheel control
Compact, lightweight aluminum alloy unit
Internal antenna lessens chance of damage
Power via 2-pin LEMO 7-17V input.
Controller Support
RT MK3.1 controller
RT Thumbwheel
RT Smartknob
Run/Stop Support
Including but not limited to:
ARRI ALEXA, ALEXA Mini, AMIRA, etc.
Blackmagic
Canon C100, C300 (MkII+), C500
Panasonic Varicam
Phantom
RED DSMC2, DSMC, ONE
Sony F5, F55, FS7 (MkII+)
Camera Control Support
RED DSMC2, RED DSMC control:
EF/AF Focus/Iris
Shutter
ISO
Button features: 2x Magnification, Edge, Focus Assist
UPC: 818264022214
Teradek RT MOTR.X Brushless Lens Motor
Use the Teradek RT MOTR.X Brushless Lens Motor with Teradek RT series receivers and controllers to control your focus, iris, or zoom with its super-speed, high-torque design. The motor comes with a standard 0.8 MOD cine gear which can be swapped out for different-size, separately available gears. Its durable aluminum design helps it prevent damage in the field.
The MOTR.X features one input and one output motor control port, and it can be daisy-chained with other MOTR.X motors to limit the need for additional cabling. The ultra-quiet motor's 3Nm torque allows you to control your lens with ease and speed at up to 6.2 revolutions per second. The built-in rod clamp supports mounting on 15 or 19mm rods.
Super-speed focus, iris, or zoom lens motor
Features 3Nm torque and a maximum speed of 6.2 revolutions per second
One input and one output motor control port allows for daisy-chaining with other MOTR.X motors
Built-in rod clamp allows mounting onto 15 or 19mm rods
Constructed with aluminum for durability
UPC: 818264024447
Teradek RT CTRL.1 Single-Axis Wireless Lens Controller
For precise lens control with your Teradek RT motors and receivers, the Teradek RT CTRL.1 Single-Axis Wireless Lens Controller can control focus, iris, or zoom with ease. The CTRL.1 has a wireless range of 5000' so you can control your lens functions when up on a crane or down the block, or you can use an optional 5-pin motor controller cable to connect directly to a motor.
The large focus knob, start/stop control button, bright OLED display for configuration and lens data, and its lightweight design make the CTRL.1 accessible and easy to use. You can also control multiple motor units on the same lens simultaneously with the CTRL.1.
It's powered by a single LP-E6 battery which provides approximately 36 hours of usage time. Optional features include a lens mapping firmware update to utilize separately available, pre-marked focus or iris rings for quick autocalibration when switching lenses during a shoot. The CTRL.1 comes with a neck strap, a mini-USB firmware cable, and a large hard-shell case with custom foam insert to transport your controller and cables.
UPC: 818264024430
Teradek RT Controller Neck Strap
This RT Controller Neck Strap from Teradek is designed to carry the MK3.1 controller hand unit. Use this strap to position the control unit around your neck or across your body, or to drape the controller from a stand when not in use.
UPC: 818264022412
Teradek LP-E6 Compatible 7.4V/2000mAh Battery Charger with US Plug
The Paralinx Battery Charger from Teradek is designed for charging the LP-E6 compatible 7.4V/2000mAh battery pack for the Paralinx Triton transmitter unit.
UPC: 750408363893
Teradek RT Receiver 19/15mm Rod Clamp with 1/4"-20 Mount
The RT Receiver Rod Clamp from Teradek is used to securely mount an RT receiver to a single 19mm or 15mm rod. Mount the Receiver Rod Clamp directly to the 1/4"-20 thread on an MDR-M or MK3.1 Receiver, or to the 1/4"-20 thread on the mounting bracket for the MDR-MB unit. This compact, double bracket's 1/4"-20 thumbscrew fastens to a 19mm rod on one flank, or to a 15mm rod on the other.
UPC: 818264022085
Teradek RT Latitude MDR Receiver D-Tap Power Cable (16", RA to Straight)
This 16" RT MDR Power Cable from Teradek connects power to the Latitude MDR receiver from a battery with a D-tap output port. This cable is designed with a right-angled, 4-pin, Hirose connector on one end, and a straight, D-Tap connector on the other.
UPC: 818264022733
Teradek RT Wired-Mode Controller Cable (6.6')
Use this 6.6' RT Wired-Mode Controller Cable from Teradek to connect an RT controller to an RT receiver in settings like hospitals where wireless use is not practical, or not permitted. This cable is compatible with the MK3.1 Controller, MK3.1 Receiver, all Latitude MDR models, Smartknob, other RT controllers, and supported OMOD controls.
Design features include two LEMO connectors, both straight-angled. One of three lengths available, this RT Wired-Mode cable enables you to work up to 6.6' away from your camera rig.
UPC: 818264021859
We at Guru Enterprises in Chatsworth, CA thank-you for stopping by. Please keep us in mind for all your requirements in motion picture equipment in future.
We deal in both - New & Used Gear.
Feedback is very important to us. We would appreciate if you would leave it for us once you have received your item. It lets us know you have received your item and are happy with your purchase.
We request that you attempt to resolve a problem by first contacting us before leaving feedback as problems tend to be a straightforward case of miss-communication.
Buyers shipping within the 36 States that require collection of Internet Sales Tax will be subject to sales tax.
(California residents will have to pay 9.5% for sales tax.)
Free s/h to anywhere in the US by FedEx Ground. We ship worldwide.
We guarantee each item we sell on eBay to be exactly as described. If a buyer receives an item and is not as described, they can return the item within 14 days for a refund. Email for more information.
We strive to offer courtesy to my customers. We hope that we have described the item to complete satisfaction. Please email with any questions if we have forgotten something.
SHIPPING
We ship Worldwide.
17
HAPPY YEARS OF SELLING & BUYING ON EBAY !
Buy with confidence ~ ~ check our excellent feedback!
FAST SHIPPING
All our items are
in stock
(10,000)
We strive to ship within 24 hours of payment.